Supported NFC Tag Specifications
The following NFC tags are recommended and supported for use with MyQ Roger. These tags are required to pair Single-Function Printers (SFPs) and can be used as an alternative login method to an embedded terminal via the MyQ Roger mobile app.
Tag Type | Size (mm) | NFC Forum Type | Usable User Memory (Bytes) |
|---|---|---|---|
MIFARE Ultralight | 25 | Type 2 | 48 |
MIFARE Ultralight | 35 | Type 2 | 48 |
NTAG213 | 25 | Type 2 | 144 |
NTAG213 | 38 | Type 2 | 144 |
NTAG213 | 50 | Type 2 | 144 |
NTAG213 | 12x20 | Type 2 | 144 |
NTAG213 | 35x35 | Type 2 | 144 |
MIFARE Ultralight
The common Ultralight chip offers 48 bytes of usable memory. While some variants (like Ultralight C) provide 144 bytes, this chip is still suitable for simple device pairing data.
Specification | Value |
|---|---|
Memory (User Programmable) | 48 bytes |
Standard / NFC Forum | ISO/IEC 14443 Type A, NFC Forum Type 2 Tag |
Operating Frequency | 13.56 MHz |
Data Transmission Rate | 106 kbit/s |
Unique Identifier (UID) | 7-byte (factory programmed) |
NTAG213
These chips consistently offer 144 bytes of usable memory. This is the recommended standard for all device pairing and authentication data within MyQ Roger.
Specification | Value |
|---|---|
Memory (User Programmable) | 144 bytes |
Standard / NFC Forum | ISO/IEC 14443 Type A, NFC Forum Type 2 Tag |
Operating Frequency | 13.56 MHz |
Data Transmission Rate | 106 kbit/s |
Unique Identifier (UID) | 7-byte (factory programmed) |
Signal Strength Requirement | Minimum 8–9 (ensures secure and reliable operation) |
Common Supported Sizes | 25 mm, 35 mm, 38 mm, 40 mm, 50 mm diameter |