Skip to main content
Skip table of contents

Registering the Card Reader in Newer Devices

To register a USB card reader on the printing device’s touch panel:

  1. On the MyQ Roger login screen press the Back button at the bottom of the screen.

BackButton.png

 

  1. Find the Settings button on the Ricoh screen and press it to open the settings.

RicohSettingsButton.png

 

  1. Tap Login at the top of the screen.

LoginNewer.png

 

  1. Enter the device administrator’s username and password and tap Login.

DeviceAdminLogin.png

 

  1. Tap System settings.

SystemSettings.png

 

  1. Select Network/Interface on the left-side menu and then tap External Interface Software Settings.

NetworkInterface.png

 

  1. In the Select IC Card Reader field, tap on Do not use to open the drop-down menu.

SelectICReader.png

 

  1. And then select Proximity Card Reader from the drop-down.

ProximityReader.png

 

  1. In Proximity Card Reader Software Settings, select Not Set.

ProximitySettings.png

 

  1. Connect the card reader when this screen is displayed:

ConnectReader.png

 

  1. Confirm the settings and tap OK.

ReaderConfirm.png

 

  1. Restart the device.

  2. Add the card reader's Vendor ID and Product ID to the USB device list on the printing device’s Web UI.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.

Contact Support Close