Skip to main content
Skip table of contents

Configuration

Print Driver Configuration

During the MyQ Roger Client installation, one or more printers are created on your system based on the parameters of the installation. No further configuration of print drivers is required.

Network Settings

Target

Protocol, Port

Description

MyQ Roger Server

HTTPS, 433 | TLS secured

  • MyQ Roger Client authentication

  • User authentication

  • Reporting jobs

Event Bus

AMQP, 5671 | TLS secured

  • Events Release, Delete, etc.

Printer

SNMP, 161,162

  • Get machine Serial Number to confirm a job release target

Printer

RAW print, 9100 | unsecured

  • Releasing a job

SNMP Settings

MyQ Roger Client supports both SNMPv2 and SNMPv3.

  • If you want to use SNMPv3, you have to properly define the settings in both the device and your tenant (MyQ Roger Server UI>Device Settings>SNMP>SNMP version).

  • Or you can set the SNMP to version 2 on your tenant with no further setup and release jobs easily.

For more information about SNMP configuration, see SNMP Tab in the MyQ Roger Server Administration guide.

If the settings are incorrect, MRC will not be able to find the printers and release jobs.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.